Information For Authors

Interested in submitting to this journal? We recommend that you review the About the Journal page for the journal's section policies, as well as the Author Guidelines. Authors need to register with the journal prior to submitting or, if already registered, can simply log in and begin the five-step process.

Authors Submission Ethics:

• Only unpublished manuscripts should be submitted for consideration.
• Submitted manuscripts must be the original work of the author/authors
• The article should not have been submitted to another journal already or concurrently.
• Any conflict of interest must be clearly stated and acknowledged.
• All the data or statements used in the development of the manuscript must be properly acknowledged.
• All errors discovered in the manuscript after submission must be swiftly communicated to the editor.

Article Preparation Guidelines:

The journal publishes high-quality papers on theoretical developments and practical applications in engineering and engineering technology, physical and life sciences, industrial operations and building services, and computer and information technology in the form of original research papers, state-of-the-art reviews, and high-quality technical notes. The general journal component format is as follows:

1. Abstract: This should contain only the motivation, aim of the study, materials, and methodology, results obtained, conclusions, and recommendations in brief. The abstract should not exceed 300 words. The study should have maximum of 8 keywords.
2. Introduction: This should briefly describe why the study is important, considering previous situations and scenarios and some literatures on similar works or experiments, the types of materials used and other methodologies, a possible motivation for the research, and stating the gap filled by the study, etc. All literature considered must be duly acknowledged. It may contain subheadings if the need arises.
3. Materials and Methods: This should explain the specification of the material used and the methods followed to achieve the purpose of the research. It may contain other subheadings if the need arises.
4. Result and Discussion: This should display the findings of the research and an explanation of the results. This may be in two headings (i.e. results separate from discussion).
5. Conclusions: This should give a general outcome of the result and discussions.
6. Recommendation: This should include possible further studies to be conducted based on the shortcoming of the present research. This section is optional and it is not numbered.
7. Acknowledgement: This should include appreciations made by the authors to funding bodies or organizations that helped or contributed towards the success of the study. This section is optional and not numbered.
8. References: This should contain the list of all reviewed and acknowledged articles and manuscripts in the study. The citation of references in the text should be numbered consecutively starting from the beginning of the report using a square bracket with Arabic numerals. Such as for one reference [1], for two or three references not in sequences [1, 4], and three [1, 5, 7], for references in sequence it should be [2 – 4], and so on.

The general formats include:

1. All manuscripts should be typed in Arial Narrow (compatible with newer versions), A4size, in English language, double line spaced and 0 points before and after spacing, and submitted in a single column. Alternatively papers may be formatted as in the template downloaded in the journal website. The theme font should be in Arial Narrow and 7500 words maximum
2. Margins should be 1.2 inches (3cm) left, 0.8 inches (2cm) top, bottom, and right.
3. All headings from the Introduction to the Conclusion should be numbered sequentially using Arabic numerals 1., 2., 3., etc. and aligned left. Subheadings are numbered 1.1, 1.2, etc. If a subsection must be further divided, the numbers 1.1.1, 1.1.2, etc. are used and are flushed left in Italics.
4. Figure captions should appear below the figure and centred and in sentence case. When referring to a figure in the body of the text, the abbreviation "Fig.” should be used followed by the number. Figures should be numbered in the order they appear in the text. Table captions should appear centred above the table and in sentence case. When referring to a table in the text, no abbreviation is used i.e. the word "Table" is used.
5. Figures and tables should be clear and those that are extra-large should be in a single column. They should be numbered sequentially using Arabic numerals as they appear in the report.

Referencing Sample

The references should be as shown below:

1. Pydi, H. P.; Murthy, B. S. and Sivaprasad, D. (2012). Scanning Electron Microscope Studies on Dry Sliding Wear Behaviour of Metal Matrix Composites with Aluminium and Rice Husk Ash. International Journal of Integrative sciences, Innovation and Technology, 1(2), 1-5.
2. Ram, P. and Monike, P. (2012). Rice Husk Ash as a Renewable Source for the Production of Value Added Silica Gel and its Application: An Overview. Bulletin of Chemical Reaction Engineering and Catalysis, 1-20.
3. Chawla, A. A. and Chawla, N. (2004). Metal Matrix Composites. Boston, Kluwer Academic Publishers.
4. Bishop, P. O. (1970). Neurophysiology of Binocular Vision, in J. Houseman (Ed.), Handbook of Physiology, 4 New York: Springer-Verlag, 342-366.
5. Chan, D. S. (1978). Theory and Implementation of Multidimensional Discrete Systems for Signal Processing, Doctoral Diss., Massachusetts Institute of Technology, Cambridge, MA.
6. Book, W. J. (1990). Modelling Design and Control of Flexible Manipulator Arms: A Tutorial Review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 500-506.
7. Akerkar, R. A. and Lingras, P. (2008). An Intelligent Web: Theory and Practice, 1st ed., Boston, Johns and Bartlett.

Article Processing Charges (APC)

All manuscripts submitted to SAJSET are assumed to be submitted under the open access publishing model and conform to the manuscript preparation guidelines. Papers submitted for publication are rigorously peer-reviewed in the normal way under editorial board control. When an article is accepted for publication, the journal will issue to the corresponding author an acceptance letter containing the name/names of the author/authors, the decision of the editorial board, reviewer's reports, and payment details. Once an article is accepted and the publication fee has been paid, the article will be formatted according to manuscript publication format and published online in the upcoming issue. The authors are to download their article after publication from the SAJSET website www.sajsetjournal.com.ng and the hard copy shall where applicable be sent to the authors within one to two weeks after an issue is published. Payment of charges may be made via one of the following modes:

1. Authors shall pay the sum of ₦10,000.00 before submission of article as journal reviewing and processing charges for authors within Nigeria. The receipt of payment shall be submitted alongside the article.
2. The authors also shall pay the sum of ₦20,000.00 or $70.00 as processing, formatting, publication, website and data maintenance charges, and other administration charges.
3. The cover page, table of content and the articles for each issue are available online for downloading. If the author or authors wishes to obtain a hard copy of the journal they should pay an additional $15.00 or ₦10,000.00 per copy.
4. The APC payment should be made only after acceptance and through the details provided in the acceptance letter.
5. All payment should be made to the following account details

Account Name: Abaullahi Mohammed Usman